High-altitude transportation of goods has created unique problems in maintaining the integrity of the packaging. Ground transportation through higher elevations and air transportation via cargo and feeder aircraft with either partial or no pressurization results in a high incidence of reports of packaging failure. Packages sealed at or near sea level will experience an increased pressure differential on the seal/closure/finish with exposure to higher elevations. This pressure differential can cause leaks.
For the past four years, Michigan State University's School of Packaging has been involved in studies to determine the effects of simultaneous vibration and low pressure on package integrity. These projects, funded by the Federal Aviation Administration and conducted by the Consortium of Distribution Packaging Research, aim to identify problems with existing packages and develop new test methods that can reduce the number of leaks in air shipments. Among the test results were the following:
• Wide-mouth samples (>28-mm) leaked more than narrow-mouth ones.
• HDPE bottles leaked more than glass bottles: 30.3% vs 20.6%, respectively.
• The average failure rate (leaks) for the entire study was 25.4%.
• Closure back-off was not observed in any of the leakers. This was verified by putting aligned ink marks on the cap and bottle, then testing for misalignment.
• Higher failure rates for the HDPE samples can be attributed to several effects: larger tolerances in finish specifications for plastic bottles and closures as compared to glass bottles and phenolic closures; the effect of temperature and creep; and that plastic bottles tend to "panel" (buckle inward)
when the headspace air escapes, taking product with it.
• The overall failure rate for a liner made from a PE foam core between two PE sheet layers was 91 leakers out of 270 samples tested, or 33.7%; 22.2% for PVC liners. A larger percentage of PVC liners with paperboard backing showed swelling and delamination during the test, resulting in package failure and leaks. The overall failure for linerless closures was 20% of the 270 samples tested.
• Recommended application torques on closures, consistent with industry practice, do not prevent leaks.
• Leaks were observed in samples that retained a residual removal torque after the test, so the closures retained some tightness. March 10, 2006
No wonder. Your company is likely being squeezed by regulations, validation issues, new technologies such as advanced machine controls and RFID, not to mention a host of broader issues ranging from individual patient compliance to a potential global bird flu pandemic.
If that's not enough to spike your blood pressure, all these challenges hit at a time when the public opinion of the pharmaceutical industry is about the same as it is for the tobacco business. That's according to Carl Fearn, sales director for IMS Health in Australia, during his speech at last month's ISPE Annual Meeting. Fearn attributed the information to a recent Harris consumer poll, declaring, "That's just not right, since our products help save lives."
Healthcare packaging professionals face numerous critical issues. One of the most alarming threats facing industry and consumers is counterfeit drugs. The topic was discussed at the ISPE meeting in Phoenix, as well as at October's Cold Chain Distribution for Pharmaceuticals 2005 Conference in Philadelphia, at September's Frontline Solutions Conference and Expo in Chicago, and at last month's PIRA International Innovations in Security Technology Conference in Chicago. December 10, 2005
Health Resources LLC of Hueytown, AL, was established in 1995 as a manufacturer of natural health supplements available by mail order. Today, the company offers more than 400 different SKUs, with products that promote a range of health solutions, including joint relief, heart health, reduced inflammation, and better digestion, among many others. In March, the company began running six AirPouch Express 3 air-pouch void-fill systems from Automated Packaging Systems to protect its bottles of product during shipment. The switch to air-pouch void-fill systems from loose-fill peanuts increases productivity, lessens mess, and reduces costs. November 10, 2005
