Home > Case erecting and packing 

Case erecting and packing

Articles focus on equipment that erects corrugated or paperboard blanks, fills packaged product into the set-up container, closes and seals it shut, typically with hot melt glue or tape, or via interlocking flaps.

Market research delivers packaging machinery intelligence

Validation compliance, real-time data, and sustainability are among the challenges for packaging equipment, according to pharmaceutical and nutraceutical firms....

Tray former machine

• TSB-100 erects trays for virtually any industry, including pharmaceutical and medical device applications • accommodates up to 3,300 trays/hr; accepts tray sizes from 8 in. x 8 in. to 40 in. x 40 in. • machine is compact and...

Labeling system for e-Pedigree/ track-and-trace

• Model 1400 Corner Wrap Labeling System prints and applies labels to the corner of a case; configurable to apply to the leading/side panels or trailing/side panels of a case • can also be designed to fulfill e-Pedigree or track-and-trace...

Automatic Palletization: Savings at all Levels

In addition to shrink-wrapping and case packing machinery, Cermex offers a wide range of palletizers....

Video: Case packer, palletizer combination

Bergami case packer pairs with robotic mini palletizer in a small-footprint design....

End-load case/tray packer

• EL-2000 Series intermittent-motion end-load packer operates at speeds up to 25 cases/min...

Robotic case packer

• Model V 30 machine integrates a Fanuc robot with ESS end-of-arm tooling and Allen-Bradley controls • forms, loads, and seals cases while occupying a small footprint • a variety of Fanuc robots may be specified, depending on the...

Horizontal case packer

• Model K 15's balcony design and rear drive allow complete access for product changeover, inspection, and maintenance • loads cartons, bundles, pouches, squeezable tubes, etc. into corrugated cases at speeds to 18 cases/min • controlled via an Allen-Bradley PLC...

Schwarz powers powder packaging

Asymmetric containers are more problematic for filling than symmetric ones, but they're little problem for Schwarz Pharma. The Seymour, IN-based pharmaceutical products company has packaged its oral solution powders into 4-L (1-gal) offset-neck high-density polyethylene bottles at rates around...

AstraZeneca relies on robotics

Packaging a blockbuster prescription drug such as AstraZeneca's Nexium blister- and wallet-packs (shown in photo) demands efficiency. At AstraZeneca's plant in Södertälje, Sweden, nine robotic cells, featuring a mix of 16 robots from ABB Robotics and other suppliers, is...

Sleeving and packing system

* A+F SetLine sleeve-packing system combines sleeving and case packing into a space-saving, cost-effective operation * forms multipack sets in groups at the filler outfeed, placing these product sets into a sleeving station, where sleeves are applied * powered...

Multipack case packer

• Model 800accommodates shrink-wrapped multipacks of healthcare products, whether in plastic bottles or aerosol cans • accumulates product, erects cases, packs and seals in one machine at 25/min speeds • offers variety of packing patterns and product feeds, and offers...

Side belt-drive case erectors

• seal variety of cases from single- to triple-wall corrugated, with a lifetime guarantee on the structural welded steel framework • 2-EZ HS erects cases from 8x6x5 in to 24x16x18 in, to 20 cases/min • 2-EZ SB erects cases from...

* indicates a sponsored article that was submitted directly to this Web site by the supplier, and was not handled by the Healthcare Packaging editorial staff. Healthcare Packaging may share your contact information with our sponsors, as detailed in our Privacy Policy. Healthcare Packaging will not share your information with a sponsor whose content you have not reviewed.